Trả lời: Tạo mặt cắt và chỉnh sửa mặt cắt trong REVIT
ltlt viết:
Em ko đo đc kích thước theo chiều rộng hố ga. Bác làm ơn chỉ em thêm điểm này nữa nhe!
Here You Are:
Còn chuyên khoét thì anh chỉ biết khoe hình tròn khi tương đó là tường phẳng thôi. Còn cong như vậy anh chưa làm được. Chú tạo Family đi, sửa cái Table nào đó hoặc cái Plumbing Components nào đó.
Chú đọc cái này nhế:
Modifying Wall Elevations
1. After sketching a wall, click Modify. Then click the wall to select it.
2. On the Options Bar, click Edit Profile to enter sketch mode.
If necessary, select the elevation view in which you want to see the wall. By default, Revit MEP allows you to see the center plane in the appropriate elevation. For example, if you select the north wall, Revit MEP allows you to switch to either the North or South elevation view.
Your screen should appear something like this in sketch mode:
The 4 lines that appear represent the wall in an elevation view.
3. Edit the wall as desired.
For example, you can delete the lines and then sketch a completely different shape. You can split the existing lines and add arcs. Or you can draw openings or holes in the rectangle.
TipAs you move and edit the rectangle, datum planes appear to indicate the original shape and size of the wall when you entered sketch mode. If the sketched lines snap to the datum planes, the endpoints of the lines automatically align to the planes, unless you explicitly unlock them. If you unlock the sketched lines, you can modify them independently of the datum planes. If you exit sketch mode with the sketched lines still aligned, then as you move a datum handle, the sketched lines move with it.
4. When you are finished, click Finish Sketch.
Revit MEP returns you to the last active view.
After modifying walls shapes, your design might look something like this:
Design with non-rectangular walls and cut openings